Firewood Rack

This sculpture has function, but emphasis of the design was on beauty. I was inspired by Frank Loyd Wright with his rectilinear geometric patterns and also to contrast with a natural setting. The contrasting organic setting is the fire wood. I did however add a few leaves. The rack can be placed to show the leaves or turned around to emphasize the geometric pattern. Pine wood was used on the bottom make the rack friendly to an interior floor. The rack is three feet wide, three feet high and 15 1/2 inches deep, to hold 16 inch wood.

The Harley Owners Group had their annual event at Little Lake this July 16th. The weather was a tad hot but this year I had a shady spot. What a joyful time it was. Its all for the Bay Cliff Health Camp. I donated a brass rose sculpture for the auction. Last year it was a spider sculpture, the year before it was a skeleton's hand, I guess I'm becoming more domesticated. I had the opportunity to make friends with Micah who is enjoying Bay Cliff Health Camp this summer and was at Little Lake. Micah's assistant is holding a flower sculpture I gave him for Micah to bring home. Micah showed me some skillful driving even on the uneven ground. He even made a point to come and see me before he went back to Camp. Life is indeed good.

Past Project

One of my early metal projects, was a simple bowl. I shared my work on the "metalshapers " yahoo group site.

http://groups.yahoo.com/group/metalshapers/message/30540

Metal has become my primary media , but wood and clay, and flat art on paper are sometimes revisited.

Good Company

Some sculptures are just lucky.
This Iris now lives in an artists garden.
A peaceful spirit indeed.

Six Copper Roses

Just finished these six copper roses today. The copper is recycled from flashing scraps, the stems are made using old political sign wire.The metal is bare and will season with time.

Garden Arch

This is my first garden arch. It was constructed from 3/4" rebar. The beauty will come from climbing plants. It will stands 10 feet tall after placement in the ground. The width is six feet and depth is two feet. The sun ray pattern compliments existing art on the grounds. Its quite sturdy regardless of the minimal triangulation. There is around 240 feet of bar and over one hundred separate pieces in this work .

In Another Life

Since the snow has left, I could finally get to that old snow blower and begin the process of reincarnation. The sheet metal was what I was after. Some parts were 1/8" some a bit thinner.My Sawzall and Beverly throat-less shear were used to cut shapes. A two pound and a three pound hammer cold forged the flower components. I busted my faithful stump(too small), so I made a new stump from Ironwood. The ruffles needed heat, so I used my #2 tip on the OA torch and a pair of old rounded pliers. I burned off the paint and labels outside, YUK! This time I cut a weep hole where the leaves and bracts attach so the sculpture can be outside. There's more to go but the theme is evident.

Another Cattleya orchid Plant Sculpture

Here's another sculpture of a Cattleya Orchid. This one has different pseudo-bulbs,buds, and blossoms. There are five stages of growth shown plus a very early start. The back-bulb still has a leaf attached, but it has been attacked in is weakened condition.The main sculpture is mild steel, including the buds. The blossoms are made using copper. The copper is recycled. The Rhizome and air-roots are also recycled material. I haven't decided on what kind of finish I will use.

Cattleya Orchid Plant Sculpture Complete

Here is the completed Cattleya Orchid Plant Sculpture. The remaining air roots have beed added and the (brass)columns are also added to the blossoms. The steel components have been finished with Blueing and then clear enameled, and finally dulled with fine steel wool. The copper blossoms have been given a clear enamel coating as well.

Cattleya Orchid Plant Sculpture

A new fascination with orchids has brought me to the Cattleya. These orchids are utilized in many hybrid form because of their showy blossoms. The plant itself caught my attention, specifically as it would exist in it's natural habitat, high in a South American rain forest canopy where lots of sun and less water and nutrients are to be exploited. That explains the thickened stalk or pseudo-bulb, a storage system. This sculpture is incomplete, but the general theme carries. My intent is to include many stages along one rhizome, so there is one with just a hint of life peeking out of the bract, then one with several buds, one with a bud and two blooms, one with a stem but the blooms are past, and finally (hidden in this view) a leafless back bulb.
The blossoms are created using a recycled 1 1/2" heavy walled copper fire line from a steam plant. There was lots of annealing needed to shape the 1/16 " thick copper, something new for me. The remainder of the plant is basically mild steel sheet, and rod. The pseudo-bulbs are made in half and welded together, the buds are made in thirds, like an orange peel. There will be considerably more air roots, and the missing column in the blooms will hide the nut.
I'm happy with the color of the copper flower parts, but the steel needs color, maybe a light rust and then BLO to seal it.

Copper Orchid Progress

Unhappy with what seemed to be a sterile work , out came the torch and a bit of natural shape added. I'm much happier now. The surface of the copper is less polished too.

New Copper Orchid

This Orchid bloom is made from a recycled 1 1/2" ID copper pipe with a thickness of approximately 1/16". The pipe was once a wet fire protection line in a sawmill steam plant. I cut the pipe in sections , then made a lengthwise cut. After heating the copper with an OA torch, I opened it up to make a sheet. I traced the outline of each component on the copper, and cut it out. I had to had to heat and quench the copper several times to properly shape the metal. My anvils were made of hard wood. My hammers were made from various sizes of steel rod and old car springs. I also used a rubber hammer. The thicker copper is similar to steel in the way it shapes. Of course I had to keep annealing the copper, where I usually cold forge sheet steel. The longest dimension of this bloom is 13" and it weighs at least a pound. I'll probably finish this sculpture as a wall hanger using mild steel for the remainder of the piece. I'll take suggestions if they are prompt.
Frank

Finito

All the metal work is completed. There is now a keiki, a bud and a partially open blossom added to the Moth Orchid.

Moth Orchid with Blossoms

Not done yet, but here's a picture of the sculpture with the blossoms mounted.

Moth Orchid with leaves

Just got the leaves welded on;and pleased with the results. Next comes welding on the stainless screws to attach the blossoms.

Moth Orchid Wall Mount, Air Roots, Stalk and Blossom Stems

Here's the plant a bit further on. I actually had the stalk done but fine tuned the shape while paired with the mount. This portion of the sculpture is also from the same parlor chair. There's not much left of the chair now, I'm proud of that.

Moth Orchid Wall Mount with Air Roots

It took a bit of head scratching,but the wall mount for this project is working out well. The top of the piece accepts a 3/8" lag bolt. The bottom of a thicker air root accepts a screw to stabilize the mount. A small section pipe will receive the stalk.Everything except the pipe is from a Parlor chair I pulled from a swamp. I guess you could say this sculpture has its roots from the swamp in two different ways,source and depiction.
Frank

Moth Orchid

Started working on a new sculpture, FINALLY. Spent too many hours making a luge for a sledding/wedding party for my son and his beautiful new bride. Boy am I in good shape after moving tons of snow.
Anyhow I'm making a sculpture of a Phalaenopsis Multiflora plant. I will include these flowers plus a dead blossom, a few buds and kieki (like a spider plant starter). The plant in its natural habitat will hang from anything below the top forest canopy, not at all like the ones you see potted and held with sticks. I'm thinking of replicating this by making the sculpture a wall hanger or from a piece of swamp tree(steel)/floor stand.